ABL Can Assist You With All Your Permatex Needs!
Checkout This Handy Comparison Guide!
The information below can help you identify
Permatex® Products and the corresponding
Loctite® Products which may be similar in design or style as at 1st February 2020.
The references to certain Permatex® Products and Loctite® Products on this chart are provided as a comparative guide only and should not be regarded as a representation, warranty or guarantee as to the performance, appropriate use or application, fitness for purpose or merchantability of any Loctite® Product when compared to any Permatex® Product.
Please review the product specifications and instructions prior to using or purchasing any Permatex® Product to ensure correct performance for your application.
To the full extent permitted by law, Permatex® shall not be liable for any damages of any kind whatsoever arising out of or in connection with your reliance on the information included in the chart below.
Permatex No: PX80628
Loctite No: 6016
ABL SKU: 12647 |
 |
- Effectively replaces almost any cut gasket
- Designed to be a reliable 'formed-in-place' gaskets that resist cracking, shrinking and migrating
- Coats pre-cut gaskets to increase reliability without fouling oxygen sensors
- Temperature range of -65 degrees fahrenheit to 500 degrees fahrenheit intermittent
- Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans
|
Permatex No: PX81464
Loctite No: 771
ABL SKU: 37000 |
 |
- Concentrated and refined blend of lubricants derived from aluminium, copper and graphite lubricants
- Enables easier disassembly by preventing galling, corrosion and seizing
- Resistant to salt, corrosion and moisture - great for marine industry
|
Permatex No: PX81878
Loctite No: 6920
ABL SKU: 12640 |
 |
- For high operating temperatures common in 4-cylinder, turbocharged or high-performance engines
- The most advanced, high temp RTV silicone gasket available
- Sensor-safe, low odor, noncorrosive
- Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets
- Temperature range -65°F to 700°F (-54°C to 371°C) intermittent; resists auto and shop fluids and vibration.
|
Permatex No: PX24210
Loctite No: 242
ABL SKU: 37002 / 37003 |
 |
- All purpose - locks & seals, preventing parts loosening due to vibration
- For all nut & bolt applications 6-20mm
- Eliminates the need for stocking expensive lock nuts & lock washers
- Can be removed using hand tools for easy disassembly
- Commonly used on: Valve cover bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts and carburettor studs
|
Permatex No: PX84160
Loctite No: 1366072
ABL SKU: 37006 |
 |
- Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing
- Sets in one minute, no clamping needed
- Clear in colour
- Fills gaps and will not shrink
- Water and solvents resistant
- Temperature range -60°F to 180°F (-51°C to 82°C)
- Permanent strength up to 2500 PSI.
|
Permatex No: PX84101
Loctite No: 1365868
ABL SKU: 37007 |
 |
- Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing
- Sets in five minutes, no clamping needed
- Clear in colour
- Fills gaps and will not shrink.
- Water and solvents resistant
- Temperature range -60°F to 180°F (-51°C to 82°C)
- Permanent strength up to 3400 PSI
|
Permatex No: PX84107
Loctite No: 30 Minute
ABL SKU: 37008 |
 |
- Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing
- Sets in thirty minutes, no clamping needed
- Clear in colour
- Fills gaps and will not shrink
- When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents
- Temperature range -60°F to 180°F (-51°C to 82°C)
- Permanent strength up to 3500 PSI
|
Permatex No: PX24024
Loctite No: 222
ABL SKU: 37004 |
 |
- Permanent, high strength product that is applied to fasteners 10-25mm in size
- Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions
- Requires localised heating & hand tools to separate parts
- Applications: Assembly with air tools, cylinder block bolts, ring gear bolts & transmission shaft bolts
|
